| Datasheets | STM32F103xC/D/E Datasheet |
|---|
| Product Photos | 64-LQFP |
|---|
| Other Related Documents | STM32F103RC View All Specifications |
|---|
| Product Training Modules | Smart Grid Solutions: Smart Grid Distribution/Smart Meters
Healthcare and Wellness |
|---|
| Featured Product | STM32 32-bit Cortex MCUs |
|---|
| Article Library | Inertial Sensing Will Determine the Way Future Game Controllers Work |
|---|
Standard Package  | 160 |
|---|
| Category | Integrated Circuits (ICs) |
|---|
| Family | Embedded - Microcontrollers |
|---|
| Series | STM32 F1 |
|---|
| Packaging | Tray |
|---|
| Core Processor | ARM® Cortex®-M3 |
|---|
| Core Size | 32-Bit |
|---|
| Speed | 72MHz |
|---|
| Connectivity | CAN, I²C, IrDA, LIN, SPI, UART/USART, USB |
|---|
| Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
|---|
| Number of I/O | 51 |
|---|
| Program Memory Size | 256KB (256K x 8) |
|---|
| Program Memory Type | FLASH |
|---|
| EEPROM Size | - |
|---|
| RAM Size | 48K x 8 |
|---|
| Voltage - Supply (Vcc/Vdd) | 2 V ~ 3.6 V |
|---|
| Data Converters | A/D 16x12b; D/A 2x12b |
|---|
| Oscillator Type | Internal |
|---|
| Operating Temperature | -40°C ~ 85°C |
|---|
| Package / Case | 64-LQFP |
|---|
| Supplier Device Package | * |
|---|
| Online Catalog | STM32 F1 |
|---|
| For Use With | |
|---|
| Other Names | 497-9033
STM32F103RCT6-ND
|
|---|
|
The STM32F103RCT6 microcontroller has 256KB of Flash, 48KB RAM, 3x16-channel 12-bit A/D converter, 6x16-bit (IC/OC/PWM) timer, 3xSPI, 2x12C, 5USART, USB, CAN, 51 I/Os in a 64-pin 10mm x 10mm x 1.4mm LQFP package.
The STM32F103xx medium-density performance line family incorporates the high-performance ARM Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
Features:
- ARM 32-bit Cortex™-M3 CPU Core
- 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 or 128 Kbytes of Flash memory
- 20 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 2 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Dual-sample and hold capability
- Temperature sensor
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- Up to 51 fast I/O ports
- 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- 7 timers
- Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 16-bit, motor control PWM timer with dead-time generation and emergency stop
- 2 watchdog timers (Independent and Window)
- SysTick timer 24-bit downcounter
Applications:
- Motor drive
- Application control
- Medical and handheld equipment
- PC and gaming peripherals
- GPS platforms
- Industrial applications
- PLCs
- Inverters
- Printers
- Scanners
- Alarm systems
- Video intercoms
- HVACs