STM32F103VET6

• Specifications
• Alternative Packaging
• Features
• Documents (6)
• My Notes

Manufacturer: STMicroelectronics

Product Category: ARM Microcontrollers - MCU

RoHS: Details

Core: ARM Cortex M3

Data Bus Width: 32 bit

Maximum Clock Frequency: 72 MHz

Program Memory Size: 512 kB

Data RAM Size: 64 kB

A/D Channels Available: 16

A/D Bit Size: 12 bit

Operating Supply Voltage: 2 V to 3.6 V

Maximum Operating Temperature: + 85 C

Package / Case: LQFP-100

Mounting Style: SMD/SMT

Brand: STMicroelectronics

Data RAM Type: SRAM

Interface Type: CAN, I2C, SPI, USART, USB

Length: 14 mm

Minimum Operating Temperature: - 40 C

Number of I/Os: 80 I/O

Number of Timers: 8 Timer

On-Chip DAC: With DAC

Packaging: Tray

Processor Series: ARM Cortex-M

Program Memory Type: Flash

Series: STM32F1

Factory Pack Quantity: 90

Tradename: STM32

Key Features:

• Core: ARM 32-bit Cortex™-M3 CPU
• 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
• Single-cycle multiplication and hardware division
• Memories
• 256 to 512 Kbytes of Flash memory
• up to 64 Kbytes of SRAM
• Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
• LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
• 2.0 to 3.6 V application supply and I/Os
• POR, PDR, and programmable voltage detector (PVD)
• 4-to-16 MHz crystal oscillator
• Internal 8 MHz factory-trimmed RC
• Internal 40 kHz RC with calibration
• 32 kHz oscillator for RTC with calibration
• Low power
• Sleep, Stop and Standby modes
• V_BATsupply for RTC and backup registers
• 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
• Conversion range: 0 to 3.6 V
• Triple-sample and hold capability
• Temperature sensor
• 2 × 12-bit D/A converters
• DMA: 12-channel DMA controller
• Supported peripherals: timers, ADCs, DAC, SDIO, I²Ss, SPIs, I²Cs and USARTs
• Debug mode
• Serial wire debug (SWD) & JTAG interfaces
• Cortex-M3 Embedded Trace Macrocell™
• Up to 112 fast I/O ports
• 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
• Up to 11 timers
• Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
• 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
• 2 × watchdog timers (Independent and Window)
• SysTick timer: a 24-bit downcounter
• 2 × 16-bit basic timers to drive the DAC
• Up to 13 communication interfaces
• Up to 2 × I²C interfaces (SMBus/PMBus)
• Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
• Up to 3 SPIs (18 Mbit/s), 2 with I²S interface multiplexed
• CAN interface (2.0B Active)
• USB 2.0 full speed interface
• SDIO interface
• CRC calculation unit, 96-bit unique ID
• ECOPACK^®packages